HKS

Oil & Lubricants

HKS DSR GT Direct Sludge Remover (400 mL)

CODE: 52006-KK003Check availability

HKS DSR GT Direct Sludge Remover (400 mL) is an internal engine cleaning additive designed to help loosen sludge and deposits in areas reached by circulating engine oil. It is intended for use with existing engine oil immediately before an oil change.

Engine sludge can develop over time due to oil degradation, heat and accumulated contaminants. Appropriate internal cleaning can form part of routine engine maintenance and lubrication-system care.

HKS DSR GT mixes with the existing engine oil and circulates through the lubrication system while the engine is idling, helping loosen deposits before the used oil is drained. The service is completed by replacing the oil filter and refilling with fresh engine oil.

Supplied in a 400 mL container, the product is intended for pre-oil-change cleaning in compatible gasoline and diesel engines, subject to the manufacturer's application instructions.

THB 400

  • Helps loosen engine sludge and deposits within the lubrication system.
  • Designed for use with existing engine oil before a scheduled oil change.
  • Circulates with the engine oil to help clean areas reached by the treated lubricant.
  • Loosened contaminants can be drained together with the used engine oil.
  • Convenient pre-oil-change maintenance without a separate flushing-oil service.
  • Suitable for compatible gasoline and diesel engines.

Overview

HKS DSR GT — INTERNAL ENGINE CLEANING TECHNOLOGY

HKS DSR GT Direct Sludge Remover (400 mL) is an internal engine cleaning additive intended for use before an engine oil change. It focuses on sludge and deposit accumulation within the lubrication system that may develop over extended engine operation.

INTERNAL SLUDGE & DEPOSIT REMOVAL

Engine sludge may form through engine oil degradation, oxidation, elevated temperatures and contamination within the lubrication system.

HKS DSR GT is designed to help loosen sludge and deposits in areas reached by the treated engine oil, allowing loosened contaminants to be discharged together with the used oil during servicing.

CLEANING BEFORE AN OIL CHANGE

DSR GT is added to the existing engine oil before the scheduled oil change. The engine is then operated at idle according to the instructions on the product label, allowing the cleaning additive to circulate with the oil.

After treatment, the engine is stopped, the used oil is drained, the oil filter is replaced and fresh engine oil is added according to the vehicle manufacturer's specifications.

SUPPORTS LUBRICATION SYSTEM MAINTENANCE

Sludge accumulation may affect the cleanliness of internal engine components and lubrication-system passages.

Appropriate cleaning before an oil change can form part of a broader engine maintenance routine alongside regular oil and filter replacement.

Actual cleaning results depend on engine condition, existing deposit levels and operating history. The product cannot repair worn or damaged mechanical components.

CONVENIENT ENGINE MAINTENANCE

HKS DSR GT is designed to be incorporated into routine engine oil-change servicing without requiring a separate flushing-oil procedure during normal product application.

It offers a convenient approach to maintaining lubrication-system cleanliness when used in accordance with the product instructions.

RECOMMENDED APPLICATION

  1. Switch off the engine and check the existing oil capacity against the product label instructions.

  2. Add HKS DSR GT to the used engine oil through the engine oil filler opening at the specified dosage.

  3. Start the engine and allow it to idle for the duration stated on the product label. Do not drive the vehicle during treatment.

  4. Stop the engine and drain the used oil according to standard service procedures.

  5. Replace the oil filter and refill with fresh engine oil of the viscosity, specification and quantity recommended by the vehicle manufacturer.

Caution: Do not add this product to the fuel tank. Do not drive the vehicle while performing the flushing treatment. Always follow the dosage, operating procedure and engine restrictions stated on the product label.

PACKAGE INFORMATION

  • Product Name: HKS DSR GT Direct Sludge Remover (400 mL)

  • Product Type: Engine Internal Cleaner

  • Application: Pre-Oil Change Engine Cleaning

  • Engine Type: Gasoline / Diesel

  • Package Size: 400 mL

  • Code No.: 52006-KK003

Specification

BrandHKS
Product NameHKS DSR GT Direct Sludge Remover
Product SeriesDSR GT
Product TypeEngine Internal Cleaner
ApplicationPre-Oil Change Engine Cleaning
Engine TypeGasoline / Diesel
Primary FunctionEngine Sludge & Deposit Cleaning
Target SystemEngine Lubrication System
Application MethodAdd to Existing Engine Oil
Treatment ProcedureEngine Idling as Directed
Post-Treatment ServiceOil Drain & Filter Replacement
Package Size400 mL
Code No.52006-KK003

Application Chart

Check that the engine code, chassis code and production year match your vehicle.

BrandModelChassisYearEnginePart No.RemarkDoc
OilsDSR GTDirect Sludge Remover2024+Gasoline / Diesel52006-KK003Gasoline / DieselPDF

Product Inquiry

Interested in this HKS product? Contact our team for product details, vehicle compatibility, pricing, or information about authorized dealers.

* The information you provide will be used to respond to your inquiry in accordance with our Privacy Policy.

Other products in this category